Bambu Lab A1 Mini Dual-Sided Textured PEI Plate
19.90 € 19.90 €
19.90 €
Kaksipuolinen kuvioitu PEI-levy X1-sarjalle ja P1P:lle
Tuotekoodi :
FAP009
Yksikkö :
pcs
Tuotteet sijaitsevat omassa varastossa Suomessa.
Ilmainen toimitus yli 100€ ostoksille
Ennen klo 14 tehdyt tilaukset lähetetään saman päivän aikana. HUOM! Tilaustuote toimitetaan toimittajan varastosta 3-5 arkipäivässä ja tuotteen toimituskulut lasketaan ostoskorissa.
Bambu Lab A1 Mini kaksipuolinen kuvioitu PEI-levy
Considerations
Increasing the temperature of the heatbed enhances the adhesion of the filament to the build plate. Users can adjust the temperature of the heatbed or apply glue if additional adhesion is needed.
During the printing process, dust and grease on the surface of the build plate can negatively impact material adhesion. It is recommended to regularly clean the surface with detergent and water to eliminate any dust or grease residue first. If it doesn't work, clean the surface with alcohol.
Wait until the build plate fully cools down to prevents damage to the plate and prints when removing the printed parts.
Do not clean the plate with acetone, as it will damage the PEI surface.
Carefully sanding the surface with fine-grit (600 was recommended) sandpaper can help restore adhesion.
The Textured PEI plate is considered a consumable part, which will degrade over time. The warranty will only cover manufacturing defects, not cosmetic damage like scratches, dents, or cracks. Defective sheets upon arrival are the only ones covered by the warranty.
Installation Steps
Step 1: Align the plate with the fixed points of the platform with the name of the plate facing you
Step 2: Lower the plate and secure to the magnetic platform
Tuotetiedot: Bambu Lab A1 Mini Dual-Sided Textured PEI Plate
Tuotemerkki | Bambulab |